User Manual

Web server
5.4 Operating the virtual module on the Web server
LOGO!
Manual, 06/2014, A5E33039675
243
5.4
Operating the virtual module on the Web server
The LOGO! Web server enables you to do the following operations on the virtual LOGO!
Base Module through
LOGO! BM
menu and the virtual LOGO! TDE through
LOGO! TD
menu.
Operating the keys on the virtual module
If you have previously programmed the cursor keys and function keys in your circuit
program, you can perform the following basic operations with these keys on the virtual
LOGO! Base Module or LOGO! TDE:
To enable the functionality of the programmed cursor, click or tap the
ESC
key. Function
keys are always enabled.
You can then proceed as follows:
● To enable pulse inputs, click or tap the cursor key or function key concerned.
● To enable continuous high-level signal inputs, double-click or double-tap the cursor key or
function key concerned.
● To disable the programmed cursor key or function key, click or tap the
ESC
key again.
● To disable the display of an active message as long as this message has been previously
configured in LOGO!Soft Comfort as acknowledgable, click or tap the
OK
key.
Viewing message text
If you have configured your message text on LOGO!Soft Comfort according to the
instructions in the Online Help for LOGO!Soft Comfort, you are then able to see them on the
virtual screen of the module.
Click or tap
LOGO! BM
or
LOGO! TD
on the left navigation bar and you can view active
messages on the virtual device.