User Manual

Configuring LOGO!
8.1 Selecting parameter assignment mode
LOGO!
256 Manual, 06/2014, A5E33039675
3. Move the cursor to "②": Press
4. Confirm placing LOGO! in STOP mode by pressing
OK
with the cursor on "②".
LOGO! shows the main menu of the programming mode:
For more information about switching LOGO! to RUN mode, refer to Section "Switching
LOGO! to RUN mode (Page 78)".
Description of other menu commands of the parameter assignment menu
●
Menu command ①
For information on the various settings, refer to the following topics:
– Parameters (Page 257)
– Selecting the parameters (Page 258)
– Modifying parameters (Page 259)
– Assigning a circuit program name (Page 73)
●
Menu command ②
For information on the various settings, refer to the following topics:
– Setting the time of day and date (Page 262)
– Summertime/wintertime conversion (Page 93)
– Synchronization (Page 96)
– Setting the start screen (Page 267)
– Setting the display contrast and backlight choice (Page 263)
– Setting the default values for LOGO! (Page 261)