User Manual

Configuring LOGO!
8.1 Selecting parameter assignment mode
LOGO!
Manual, 06/2014, A5E33039675
257
●
Menu command ③
For information on the various settings, refer to the topic "Configuring network settings
(Page 99)".
●
Menu command ④
For information on the various settings, refer to the topic "Diagnosing errors from LOGO!
(Page 105)".
8.1.1
Parameters
Note
You can only view and edit parameters in the parameter assignment m
ode when they have
the read/write ("+") designation. See the "
Parameter protection (Page 129)" topic and the
"
Synchronization (Page 96)" topic.
Parameters are, for example:
● The delay times of a timer relay
● The switching times (cams) of a timer switch
● Counter thresholds
● The monitoring time for hour counters
● The trigger thresholds
A block number (Bx) and the short name of the parameter identifies each parameter.
Examples:
● T: ...is a configurable time
● MI: ...is a configurable time interval
Note
LOGO!Soft Comfort also allows you to assign
names to blocks (for more information, refer to
the chapter entitled "
LOGO! Software (Page 283)".