User Manual

Configuring LOGO!
8.1 Selecting parameter assignment mode
LOGO!
258 Manual, 06/2014, A5E33039675
8.1.2
Selecting the parameters
To select a parameter:
1. On the parameter assignment menu, move the cursor to "
①": Press or
2. Confirm "
①" with
OK
.
3. Move the cursor to "
②": Press or
4. Confirm "
②" with
OK
.
LOGO! shows the list of all available blocks, for example:
If no parameter can be set, the display shows as follows, and you can press
ESC
to
return to the parameter assignment menu.
5. Press
or to move the cursor to the block that you desire to change its parameter, and
confirm with
OK
.
6. Now, select the desired parameter: Press
or
7. Select the parameter you want to edit, and press
OK
.