User Manual

Configuring LOGO!
8.2 Setting the default values for LOGO!
LOGO!
262 Manual, 06/2014, A5E33039675
Start screen settings
You can select the default setting for the start screen (Page 267) that displays on LOGO!
when LOGO! transfers to RUN mode in programming mode or parameter assignment mode
through the following menu commands:
Message text settings
You can select settings that apply to all message text function blocks (Page 200) in
programming mode or parameter assignment mode through the following menu commands:
8.2.1
Setting the time of day and date
You can set the time of day and the date in programming mode or parameter assignment
mode.
Setting the time of day and the date in parameter assignment mode
Follow these steps to set the time of day and the date:
1. Select parameter assignment mode (Page 255).
2. On the parameter assignment menu, move the cursor to "
①": Press or
3. Confirm "
①": Press
OK
4. Move the cursor to "
②": Press or
5. Confirm "
②": Press
OK
6. Move the cursor to "
③": Press or