User Manual

Configuring LOGO!

8.2 Setting the default values for LOGO!

LOGO!

Manual, 06/2014, A5E33039675

263

7. Confirm "③": Press

LOGO! shows the following display.

8. To set the correct time of day, press

or to move the cursor to the desired position,

and press

or to change the value.

9. To set the correct date, press

or to move the cursor to the desired position, and press

or to change the value.

10.To confirm your entries: Press

Setting the time of day and the date in programming mode

If you want to set the time of day and the date in programming mode, select "①" in the main

menu, then menus "

②" and "③". You can now set the date and the time as described

earlier.

8.2.2

Setting the display contrast and backlight choice

You can set the default value for the display contrast and backlight in programming mode or

parameter assignment mode.

Setting the display contrast in parameter assignment mode

Follow these steps to set the display contrast:

1. Select parameter assignment mode (Page 255).

2. On the parameter assignment menu, move the cursor to "

①": Press or

3. Confirm "

①": Press