User Manual

Configuring LOGO!
8.2 Setting the default values for LOGO!
LOGO!
264 Manual, 06/2014, A5E33039675
4. Move the cursor to "②": Press or
5. Confirm "
②": Press
OK
6. Move the cursor to "
③": Press or
7. Confirm "
③": Press
OK
LOGO! shows the following display:
8. To change the display contrast: Press
or
9. To confirm your entry: Press
OK
Setting the display contrast in programming mode
If you want to set the display contrast in programming mode, select menu command "①" in
the main menu, then menus "
②" and "③". You can now set the display contrast as
described earlier.
Setting the backlight choice in parameter assignment mode
Follow these steps to set the backlight choice:
1. On the parameter assignment menu, move the cursor to "
①": Press or
2. Confirm "
①": Press
OK
3. Move the cursor to "
②": Press or