User Manual

Configuring LOGO!
8.2 Setting the default values for LOGO!
LOGO!
Manual, 06/2014, A5E33039675
267
Setting the number of AIs in programming mode
Follow these steps to set the number of analog inputs:
1. In the main menu of programming mode, select "
①": Press or
2. Confirm "
①": Press
OK
3. Select "
②": Press or
4. Confirm "
②": Press
OK
5. Move to "0 AI", "2 AIs" or "4 AIs": Press
or
6. Confirm your selection with
OK
, and the setting takes effect immediately.
8.2.5
Setting the start screen
You can select the default setting for the start screen that LOGO! displays in RUN mode.
You make this selection from LOGO! in either parameter assignment mode or programming
mode.
Selecting the start screen in parameter assignment mode
Follow these steps to select the start screen for LOGO!:
1. Select parameter assignment mode (Page 255).
2. On the parameter assignment menu, move the cursor to "
①": Press or
3. Confirm "
①": Press
OK
4. Move the cursor to "
②": Press or