User Manual

Using memory cards
9.2 Inserting and removing the card from LOGO!
LOGO!
274 Manual, 06/2014, A5E33039675
Removing the micro SD card
To remove the micro SD card, carefully insert a screwdriver with a 3-mm blade into the
groove on the front of the socket, and lever the socket partially out of the slot. Press the two
sides of the socket and pull it out. You can now remove the micro SD card from the socket.
Inserting the micro SD card
The entry of the card slot is chamfered on its bottom right. The edge of the cards is
chamfered accordingly. This encoding prevents you from inserting cards in the wrong way.
Insert the card into the socket, insert the socket into the slot and push it in until it engages.
Note
Make sure that you insert the card into the right position in the socket until you hear an
audible sound of a click.