User Manual

LOGO! software

11.2 Connecting LOGO! to a PC

LOGO!

Manual, 06/2014, A5E33039675

285

11.2

Connecting LOGO! to a PC

LOGO! 0BA8 has an Ethernet port so you can connect a LOGO! 0BA8 Base Module to a PC

with an Ethernet cable.

Switching LOGO! to PC ↔ LOGO! mode

Two methods are available to switch LOGO! to STOP mode:

● Switch LOGO! to STOP mode from your PC (refer to the Online Help for LOGO!Soft

Comfort).

● Select the following menu command on a device with display.

Confirm your selection with "

①":

When LOGO! is in STOP mode and online with the PC, the following PC commands are

available:

● Switch LOGO! to RUN

● Read/write the circuit program

● Read/write the summertime/wintertime

Note

For more information on LOGO! versions without display, refer to the Appendix topic "LOGO!

without display ("LOGO! Pure")

(Page 321)".