User Manual

Technical data
A.17 Technical data: LOGO! CSM12/24
LOGO!
Manual, 06/2014, A5E33039675
315
LOGO! TDE
Permissible range 20.4 VAC to 26.4 VAC
10.2 VDC to 28.8 VDC
Permissible mains frequency
47Hz to 63 Hz
Power consumption (Ethernet and
white backlight active)
• 12 VDC
• 24 VDC
• 24 VAC
• Typ. 145 mA
• Typ. 70 mA
• Typ. 75 mA
Degree of protection
IP20 for LOGO! TDE excluding front panel
IP65 for LOGO! TDE front panel
Communication port
Ethernet performance Two Ethernet interfaces with 10/100 M full/half duplex data
transmission rate
Connection distance
Max. 30 m
LCD Display and Backlight
Backlight lifetime
1)
20,000 hours
Display lifetime
2)
50,000 hours
Mounting
Mounting hole dimensions (WxH) (119 + 0.5 mm) x (78.5 + 0.5 mm)
Mounting conditions Mount the LOGO! TDE vertically on a flat surface of an IP
65 or Type 4x/12 enclosure.
1)
The backlight lifetime is when the final brightness is 50% of the original brightness.
2)
The display lifetime is calculated under ordinary operating and storage conditions: room
temperature (20 ± 8 °C), normal humidity below 65% relative humidity, and not in exposure to
direct sunlight.
A.17
Technical data: LOGO! CSM12/24
The CSM12/24 is a communications switch module with Ethernet. It can support the current
range of 12 VDC to 24 VDC.
LOGO! CSM12/24
Ethernet interface
Communications connector 4 x RJ45 jacks with MDI-X assignment 10/100 Mbps (half/full
duplex), autopolarity, autonegotiation
Network cable
Use a shielded Ethernet cable to connect to the Ethernet interface.
To minimize electromagnetic interference, make sure you use a
standard Category 5 shielded twisted-pair Ethernet cable with a
shielded RJ45 connector on each end.
Largest data packet
1518 byte
Smallest data packet
64 byte