User Manual

LOGO! installation and wiring
2.2 Installing/removing LOGO!
LOGO!
32 Manual, 06/2014, A5E33039675
2.2
Installing/removing LOGO!
Dimensions
The LOGO! installation dimensions are compliant with DIN 43880.
LOGO! can be snap-mounted to 35 mm DIN rails according to EN 60715 or mounted on the
wall with two M4 screws.
LOGO! width:
● LOGO! TDE has a width of 128.2 mm.
● LOGO! 0BA8 Base Modules have a width of 71.5 mm.
● LOGO! expansion modules have a width of 35.5 mm (DM8...) or 71.5 mm (DM16...).
Note
The figures below show you an example
of the installation and removal of a LOGO!
12/24RCE and a digital module. The measures shown apply to all other LOGO!
Base
Module versions and expansion modules.
WARNING
Risk to life when you touch live parts
Death or serious injury can result when you touch live parts.
Always switch off power before you remove or insert an expansion module.