User Manual
LOGO! installation and wiring
2.3 Wiring LOGO!
LOGO!
48 Manual, 06/2014, A5E33039675
LOGO! AM2 AQ
The illustration below shows an example of how to connect the voltage or current load.
①
Earth
②
Standard DIN rail
2.3.5
Connecting the Ethernet interface
LOGO! ...E
The LOGO! ...
E
version is equipped with a 10/100 Mbit/s Ethernet RJ45 interface.
Requirements for the network cable
Use a shielded Ethernet cable to connect to the Ethernet interface. To minimize
electromagnetic interference, make sure you use a standard Category 5 shielded twisted-
pair Ethernet cable with a shielded RJ45 connector on each end.