User Manual

Programming LOGO!
3.5 Configuring menu access protection for LOGO!
LOGO!
64 Manual, 06/2014, A5E33039675
Switching LOGO! from operator to administrator
To switch LOGO!'s access level from operator to administrator, follow these steps:
1. Move the cursor to "
①" on the main menu of programming mode: Press or
2. Confirm "
①": Press
OK
3. Move the cursor to "
②": Press or
4. Confirm "
②": Press
OK
. The display appears as follows:
5. Press
or to move up and down the alphabet to select your letters (for example,
"LOGO").
6. Confirm the password: Press
OK
LOGO! now switches to the access level of administrator and returns to the main menu.