User Manual

Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
76 Manual, 06/2014, A5E33039675
Changing the password from LOGO! Basic
You must know the current password in order to change it. From the programming menu,
follow these steps to change the password:
1. Move the cursor to "
①": Press or
2. Confirm "
①": Press
OK
The display now shows:
Enter your old password (in our case: '
AA
') by repeating steps 5 through 9 as described
earlier. Press
OK
.
Now you can enter the new password, for example, "
ZZ
".
3. Move the cursor to "
②": Press or
4. Confirm "
②": Press
OK
5. Select "
Z
": Press
6. Move to the next letter: Press
7. Select "
Z
": Press
8. Confirm your new password: Press
OK
You have now set the password to "
ZZ
", and LOGO! returns to the programming menu.
Deactivating the password from LOGO! Basic
To deactivate the password to allow, for example, another user to edit your circuit program,
you must know your current password (in our example "
ZZ
").
To deactivate the password, follow these steps in the programming menu: