User Manual

Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
Manual, 06/2014, A5E33039675
77
1. Move the cursor to "①": Press or
2. Confirm "
①": Press
OK
Enter your current password as described in steps 5 to 7 above. Confirm your entries with
OK
.
3. Move the cursor to "
②": Press or
4. Confirm "
②": Press
OK
The display now shows:
Alternatively, you can also select "
③" and clear the password by leaving the input box
blank.
5. Press any key and LOGO! returns to the programming menu. You have now cleared the
password.
Note
This action disables the password prompt, and thus permits access without a password.
L
eave the password
deactivated
for quicker progress through the remaining exercises and
examples.