User Manual

Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
Manual, 06/2014, A5E33039675
83
3. Confirm "①": Press
OK
. The display now shows:
4. On the programming menu, move the cursor to "
②": Press or
5. Confirm "
②": Press
OK
. If required, enter your password at the prompt and confirm with
OK
.
6. In the circuit program window, press
OK
to activate the cursor as a solid square.
You can now modify the current circuit program.
Adding a block to a circuit program
Press to move the cursor to B1 (B1 is the number of the OR block):
Insert the new block at this position.
Confirm with
OK
, and the cursor appears as a flashing solid square.
Press twice to select the SF list. The SF list contains the special function blocks.
Press
OK
.
LOGO! displays the block of the first special function: