User Manual

Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
Manual, 06/2014, A5E33039675
91
4. Enter a specific output value for the analog output.
5. To confirm your entry, press
OK
.
3.7.12
Defining the type of analog outputs
Analog outputs can be either 0..10V/0..20mA, which is the default, or 4..20mA
.
To define the type of analog outputs, follow these steps starting from the programming
menu:
1. Move the cursor to "
①": Press or
2. Select "
①": Press
OK
3. Move the cursor to "
AQ
": Press or
4. Select "
AQ
": Press
OK
5. Move the cursor to "
②": Press or
6. Select "
②": Press
OK
LOGO! shows the following display:
7. Move the cursor to the desired AQ, and press
OK
.
LOGO! indicates the defined type for the analog channel by a circle with a dot.
8. Select either 0..10V/0..20mA (default) or 4..20mA: Press
or
9. Confirm your selection: Press
OK
.