User Manual

Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
Manual, 06/2014, A5E33039675
93
4. Confirm "②": Press
OK
5. If you are sure that you want to clear the circuit program in the memory, move the cursor
to "
③" and confirm with
OK
. LOGO! clears the circuit program and password.
To cancel clearing of the circuit program, leave the cursor at "
④" and press
OK
.
3.7.15
Summertime/wintertime conversion
You can enable or disable automatic summertime/wintertime conversion.
Note
Summertime refers to "daylight saving time" and wintertime refers to "standard time" in the
United States.
To enable/disable automatic S/W Time conversion in programming mode:
1. Switch LOGO! to programming mode. LOGO! displays the main menu.
2. Select "
①": Press or
3. Confirm "
①": Press
OK
4. Move the cursor to "
②": Press or
5. Confirm "
②": Press
OK
6. Move the cursor to "
③": Press or