User Manual
Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
94 Manual, 06/2014, A5E33039675
7. Confirm "③": Press
OK
LOGO! shows the following display:
The current setting of automatic S/W Time conversion is indicated by a circle with a dot.
The default setting is "
④": disabled.
What is shown on the display?:
– "
④": LOGO! disables automatic S/W time conversion.
– "
⑤" represents the start and end of European summertime.
– "
⑥" represents the start and end of summertime in the United Kingdom.
– "
⑦" represents the start and end of daylight saving time (summertime) in the United
States prior to 2007.
– "
⑧" represents the start and end of daylight saving time (summertime) in the United
States in 2007 and later years.
– "
⑨" represents the start and end of Australian summertime.
– "
⑩" represents the start and end of Australian/ Tasmanian summertime.
– "
⑪" represents the start and end of New Zealand summertime.
– "
⑫": Here you can enter any month, day and time zone difference.
The table below lists the preset conversions:
Menu
command
Start of summertime
End of summertime
Time zone
difference Δ
⑤
Last Sunday in March:
02:00→03:00
Last Sunday in October:
03:00→02:00
60 minutes
⑥
Last Sunday in March:
01:00→02:00
Last Sunday in October:
02:00→01:00
60 minutes
⑦
First Sunday in April:
02:00→03:00
Last Sunday in October:
02:00→01:00
60 minutes
⑧
Second Sunday in March:
02:00→03:00
First Sunday in November:
02:00→01:00
60 minutes
⑨
Last Sunday in October:
02:00→03:00
Last Sunday in March:
03:00→02:00
60 minutes
⑩
First Sunday in October:
02:00→03:00
Last Sunday in March:
03:00→02:00
60 minutes