User Manual

Programming LOGO!
3.8 Configuring additional functions for LOGO!
LOGO!
98 Manual, 06/2014, A5E33039675
7. Apply "③": Press
OK
LOGO! shows the following display:
LOGO! indicates the current setting of the automatic synchronization function by the
circle with a dot. The default setting is "
④"; that is, the synchronization is disabled.
8. To enable synchronization, press
or to select "⑤", and then confirm with
OK
.
Enabling/disabling synchronization in parameter assignment mode
If you want to enable/disable automatic synchronization in parameter assignment mode,
select "
①" in the parameter assignment menu , then menus "②" and "③". You can now
enable/disable automatic synchronization.
3.8
Configuring additional functions for LOGO!
After you have successfully created the second circuit program, you can configure additional
functions by means of the following menu commands:
● Network
● Diagnostics
UDF and Data Log
You can configure the UDF and Data Log functions only from LOGO!Soft Comfort. After you
have configured them in LOGO!Soft Comfort and downloaded them to the LOGO! 0BA8
device, you can then edit elements connected to these functions from the device:
● UDFs (User-Defined Functions)
● Data Log
Network digital and analog I/O
You can configure the following connectors representing network digital or analog
inputs/outputs only from LOGO!Soft Comfort:
● Network digital inputs
● Network analog inputs