Datasheet

Data sheet 6GT2600-0AF00

Product type designation MDS D127 transponder

Transponder MDS D127 for RF200/RF300 ISO On-Metal

Transponder M6 ISO 15693 chip type, NXP ICODE SLI, 112 byte

user memory; 6x 6 mm (DxH); Minimum order quantity 10 units

Wireless frequencies

Operating frequency / Rated value 13.56MHz

Range / maximum 5mm; range is reader dependent: observe

http://support.automation.siemens.com/WW/view/en/67384964

Protocol / with radio transmission ISO 15693

Transfer rate / with radio transmission / maximum 26.5kbit/s

Product feature / multitag-capable Yes

Electrical data

Product component / Backup battery No

Memory

Type of memory EEPROM

Storage capacity / of the user memory 112byte

Type of memory organization UID (fixed code) 8 bytes, user memory 112 bytes, configuration

memory 8 bytes

Number of read cycles / at ambient temperature < 40

°C / maximum

100000000000000

Number of write cycles / at ambient temperature < 40

°C / maximum

1000000

6GT2600-0AF00 Subject to change without notice

Page 1/

PAGE 1
Data sheet Product type designation 6GT2600-0AF00 MDS D127 transponder Transponder MDS D127 for RF200/RF300 ISO On-Metal Transponder M6 ISO 15693 chip type, NXP ICODE SLI, 112 byte user memory; 6x 6 mm (DxH); Minimum order quantity 10 units Wireless frequencies Operating frequency / Rated value 13.56 MHz Range / maximum 5 mm; range is reader dependent: observe http://support.automation.siemens.
PAGE 2
Data retention time / at ambient temperature < 40 °C / not less than 10 y Property of memory Block-by-block write protection of the user memory Type of transponder chip used NXP I-Code SLI Mechanical data Material PA6 Color black Mounting distance / relating to metal surfaces / recommended / minimum 0 mm Permitted ambient conditions Ambient temperature ● during read/write access -25 ... +100 °C ● outside the read/write area -40 ... +125 °C ● during storage -40 ...