Data Sheet
Data sheet 6GT2810-2AB03
Product type designation RF630L transponder
SIMATIC RF630L SmartLabel Inlay PET; 54x 34 mm; ISO 18000-6C,
EPC Class 1 GEN 2 frequency 860 to 960 MHz, Chip Type NXP
G2XM 240-bit EPC memory, 64 bytes Add-on memory 2000 units on
one roll Minimum order quantity 2000 units
Suitability for operation RF600
Wireless frequencies
Operating frequency 860...960MHz
Range / maximum 5m; observe system manual RF600: overrange is possible, range
is reader dependent: observe
http://support.automation.siemens.com/WW/view/en/67384964
Protocol / with radio transmission EPCglobal Class 1 Gen 2 / ISO 18000-6C
Transfer rate / with radio transmission / maximum 320kbit/s
Product feature / multitag-capable Yes
Polarization Linear
Electrical data
Product component / Backup battery No
Memory
Type of memory EEPROM
Storage capacity / of the user memory 64byte
Type of memory organization EPC memory 96/240 bits, user memory 64 bytes (512 bits), TID
memory 8 bytes
6GT2810-2AB03 Subject to change without notice
Page 1/
3
08/29/2019 © Copyright Siemens