Data Sheet

Data sheet 6GT2810-2AB04
Product type designation RF630L transponder
SIMATIC RF630L SmartLabel PET; 74x 27 mm; ISO 18000-6C, EPC
Class 1 GEN 2, Frequency 860 to 960 MHz, Chip type NXP G2IM,
256-bit EPC memory, 64 bytes add-on memory, 2000 units on one
roll Minimum order quantity 2000 units
Suitability for operation RF600
Wireless frequencies
Operating frequency 860...960MHz
Range / maximum 4m; observe system manual RF600: overrange is possible, range
is reader dependent: observe
http://support.automation.siemens.com/WW/view/en/67384964
Protocol / with radio transmission EPCglobal Class 1 Gen 2 / ISO 18000-6C
Transfer rate / with radio transmission / maximum 320kbit/s
Product feature / multitag-capable Yes
Polarization Linear
Electrical data
Product component / Backup battery No
Memory
Type of memory EEPROM
Storage capacity / of the user memory 64byte
Type of memory organization EPC memory 256 bits, user memory 64 bytes (512 Bit), TID
memory 26 bytes - therefrom 14 bytes user TID
6GT2810-2AB04 Subject to change without notice
Page 1/
3
09/08/2019 © Copyright Siemens