Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6NH7803-3BA00-0AA0 PLC communication module

Data sheet 6NH7803-3BA00-0AA0

Product type designation TIM 3V-IE DNP3

TIM 3V-IE DNP3 communication module for SIMATIC S7-300 with

an RS232 interface for DNP3 communication via a classic WAN and

an RJ45 interface for DNP3 communication via a IP-based network

(WAN or LAN)

Transmission rate

Transfer rate

● for Industrial Ethernet

10...100Mbit/s

● acc. to RS 232

9600...38400bit/s

Interfaces

Number of interfaces / acc. to Industrial Ethernet 1

Number of electrical connections

● for external data transmission / acc. to RS 232

● for power supply

Type of electrical connection

● of Industrial Ethernet interface

RJ45 port

● at interface 1 / for external data transmission

9 pin Sub-D-connector (RS232)

● for power supply

2-pole plugable terminal block

design of the removable storage / C-PLUG No

Supply voltage, current consumption, power loss

Type of voltage / of the supply voltage DC

Supply voltage 24V

6NH7803-3BA00-0AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet Product type designation 6NH7803-3BA00-0AA0 TIM 3V-IE DNP3 TIM 3V-IE DNP3 communication module for SIMATIC S7-300 with an RS232 interface for DNP3 communication via a classic WAN and an RJ45 interface for DNP3 communication via a IP-based network (WAN or LAN) Transmission rate Transfer rate ● for Industrial Ethernet 10 ... 100 Mbit/s ● acc. to RS 232 9600 ... 38400 bit/s Interfaces Number of interfaces / acc.
PAGE 2
Supply voltage 20.4 ... 28.8 V Supply voltage / external / at DC / Rated value 24 V Supply voltage / external / at DC / rated value 20.4 ... 28.8 V Consumed current ● from backplane bus / at DC / at 24 V / maximum 0.2 A ● from external supply voltage / at DC / at 24 V / maximum 0.2 A Power loss [W] 5.8 W Product extension / optional / Backup battery No Ambient conditions Ambient temperature ● during operation 0 ... 60 °C ● during storage -40 ... +70 °C ● during transport -40 ...
PAGE 3
● Node station Yes ● substation Yes ● TIM control center Yes Protocol / is supported ● DNP3 Yes ● SINAUT ST1 protocol No ● SINAUT ST7 protocol No ● Modbus RTU Yes Product function / data buffering if connection is aborted Yes; 64,000 data points with one master Number of DNP3 masters ● for Ethernet / maximum 8 ● with RS 232 interface / maximum 1 Number of Modbus RTU slaves / maximum 1 Product functions / management, configuration Configuration software ● required Storage location / of
PAGE 4
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates.