Datasheet

6SL3210-1KE22-6UB1
Data sheet for SINAMICS G120C
MLFB-Ordering data
Figure similar
Rated data
Ambient conditions
General tech. specifications
Input
Output
Ambient temperature
Relative humidity
Number of phases
Max. operation
Storage
Transport
Operation
Cooling air requirement
Cooling
Installation altitude
Rated power (LO)
Rated voltage
Number of phases
Line voltage
Line frequency
Rated current (LO)
Rated current (HO)
Rated power (HO)
Power factor λ
Offset factor cos φ
Sound pressure level (1m)
Power loss
Rated current (IN)
Rated current (LO)
Pulse frequency
Rated current (HO)
Max. output current
Output frequency for V/f control
Overload capability
Output frequency for vector control
26.00 A
7.50 kW
11.00 kW
400 V
4 kHz
0.95
66 dB
0.35 kW
25.00 A
16.50 A
33.00 A
26.00 A
33.00 A
0.018 m³/s
1000 m
Air cooling using an integrated fan
150 % base load current IL for 3 s, followed by 110 % base load current IL for 57 s in a
300 s cycle time
Consignment no. :
Remarks :
Item no. :
Offer no. :
Order no. :
Project :
Client order no. :
200 % base load current IH for 3 s, followed by 150 % base load current IH for 57 s in a
300 s cycle time
3 AC
3 AC
380 ... 480 V +10 % -20 %
47 ... 63 Hz
0 ... 240 Hz
0 ... 550 Hz
95 % At 40 °C (104 °F), condensation
and icing not permissible
-40 ... 70 °C (-40 ... 158 °F)
-40 ... 70 °C (-40 ... 158 °F)
-10 ... 40 °C (14 ... 104 °F)
0.70 ... 0.85
High Overload (HO)
Low Overload (LO)
0.97Efficiency η
No
No
Yes
Encoderless torque control
Yes
Yes
Sensorless vector control
V/f linear / square-law / parameterizable
Yes
V/f with flux current control (FCC)
No
Vector control, with sensor
Closed-loop control techniques
Torque control, with encoder
V/f ECO linear / square-law
Communication RS485
Communication
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Generated Fri Jan 13 15:03:58 CET 2017
Page 1 of 2