Datasheet

6SL3210-1PB21-4AL0
Data sheet for SINAMICS Power Module PM240-2
MLFB-Ordering data
Figure similar
Compliance with standards
CE marking
Standards
Low-voltage directive 2006/95/EC
UL, cUL, CE, C-Tick (RCM), SEMI F47
Mechanical data
165 mm (6.50 in)
Degree of protection IP20 / UL open type
140 mm (5.51 in)
Height
Net weight 5.20 kg (11.46 lb)
Depth
Size
Width
355 mm (13.98 in)
FSC
Plug-in screw terminals
Version
Unshielded 100 m (328.08 ft)
Version
1.50 ... 6.00 mm² (AWG 16 ... AWG 10)
Max. motor cable length
Conductor cross-section
Connections
Plug-in screw terminals
Motor end
50 m (164.04 ft)
Line side
Conductor cross-section
1.50 ... 6.00 mm² (AWG 16 ... AWG 10)
Shielded
Converter losses to EN 50598-2*
Comparison with the reference converter (90% /
100%)
-44.08 %
94.0 W (1.65 %)
160.0 W (2.82 %)
f
128.0 W (2.26 %)
25%
100%
89.0 W (1.46 %)
108.0 W (1.90 %)
64.0 W (1.12 %)
50%
67 W (1.18 %)
50%
90.0 W (1.32 %)
90%
I
The diagram shows the losses for the points (as per standard EN 50598) of the relative torque
generating current (I) over the relative motor stator frequency(f). The values are valid for the basic
version of the converter without options/components.
The percentage values show the losses in relation to the rated apparent power of the converter.
*converted values
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Generated Fri Apr 24 08:06:36 CEST 2020
Page 2 of 2