Datasheet

ManualsBrandsSIEMENS ManualsPanel-Mount InstrumentsSENTRON PAC3200 Multifunctional measuring apparatus SENTRON PAC3200 Max. 3 x 690/400 Vac Assembly dimensions 92

Product data sheet 7KM2112-0BA00-3AA0

Similar to image

SENTRON PAC3200;

LCD;

96X96MM POWER MONITORING DEVICE PANEL MOUNT

TYPE FOR MEASUREMENT OF ELECTR. VALUES VAUX:

110-340VDC / 95-240VAC VIN: MAX.690/400V;

45-65HZ AMPIN: X/1A OR X/5A AC COMPRESSION TYPE

TERMINALS

General technical data:

product designation multimeter

product brand name SENTRON

Product-type designation PAC3200

Size of multimeter / company-specific size 96

Design of the product basic

Product function

• voltage measurement Yes

• current measurement Yes

• active power measurement Yes

• reactive power measurement Yes

• pulse measurement Yes

• frequency measurement Yes

Mean time between failures (MTBF) a 185.8

Item designation

• according to DIN 40719 extendable after IEC 204-2 / according

to IEC 750

• according to DIN EN 61346-2 P

Measurement:

7KM2112-0BA00-3AA0

Page 1/ 05/21/2013

subject to modifications

Summary of content (7 pages)

PAGE 1
Product data sheet 7KM2112-0BA00-3AA0 SENTRON PAC3200; LCD; 96X96MM POWER MONITORING DEVICE PANEL MOUNT TYPE FOR MEASUREMENT OF ELECTR. VALUES VAUX: 110-340VDC / 95-240VAC VIN: MAX.
PAGE 2
Measuring methode • for voltage measurement RMS • for current measurement TRMS Type of measured value detection complete Curve form of the voltage Sinusoidal or distorted Measurable line frequency Hz 45 … 65 Operating mode for measured value detection • automatic line frequency detection Yes • set at 50 Hz No • set to 60 Hz No Measuring inputs for voltage: Measurable supply voltage • between (PE)N and L / for AC / maximum nominal value V 400 • between the outer conductors / for AC / maxi
PAGE 3
Formula for relative total measurement inaccuracy • for measured variable voltage +/- 0,3 % • for measured variable current +/- 0,2 % • for measured variable output +/- 0,5 % • for measured variable output factor +/- 0,5 % • for measured variable active energy Cl. 0.5 acc. to...
PAGE 4
• for signal <1> / mA 27 • at signal <0> / maximum mA 0.
PAGE 5
• solid 1x (0.5 ... 4 mm2), 2x (0.5 ... 2.5 mm2) • finely stranded / with wire end processing 1x (0.5 ... 2.5 mm2), 2x (0.5 ... 1.5 mm2) • for AWG conductors / solid 2x 20 to 14 Type of connectable conductor cross section • at the inputs for supply voltage • solid 1x (0.5 ... 4 mm2), 2x (0.5 ... 2.5 mm2) • finely stranded / with wire end processing 1x (0.5 ... 2.5 mm2), 2 (0.5 ... 1.5 mm2) • for AWG conductors / solid 2x 20 to 14 • at the digital inputs / solid 1x (0.2 ... 2.5 mm2), 2x (0.2 ...
PAGE 6
• during the operating phase Installation altitude / at a height over sea level / maximum % 5 … 95 m 2,000 Norm • for environmental coldness check IEC 60068-2-1 • for environmental dry heat check IEC 60068-2-2 • for cyclic, environmental damp heat check IEC 60068-2-30 Certificates/approvals: Verification of suitability • as EC declaration of conformity IEC 61010-1: 2001 (2nd Ed.) with Corr. 1, EN 610101: 2001 (2nd Ed.