Datasheet

ManualsBrandsSIEMENS ManualsPanel-Mount InstrumentsSENTRON PAC3100 Multifunctional measuring apparatus SENTRON PAC3100 Max. 3 x 480/277 Vac Assembly dimensions 92

Data sheet 7KM3133-0BA00-3AA0

SENTRON, measuring device, 7KM PAC3100, LCD, L-L: 480 V, L-N:

277 V, 3-phase, Modbus RTU, active/reactive energy, class 1 acc. to

IEC 61557-12 & 62053- 21, wide-range power sup. unit AC/DC,

screw terminals

Model

Product brand name SENTRON

Product designation 7KM PAC3100

Design of the product basic

Product type designation Measuring instrument

Type of measured value detection complete

Design of the power supply Wide-range power supply

General technical data

Cutout width 92mm

Cutout height 92mm

Size of Power Monitoring Device / company-specific size 96

Operating mode for measured value detection

● automatic line frequency detection

Yes

● set at 50 Hz

● set to 60 Hz

Pulse duration

● initial value

30ms

● Full-scale value

500ms

7KM3133-0BA00-3AA0 Subject to change without notice

Page 1/

Summary of content (9 pages)

PAGE 1
Data sheet 7KM3133-0BA00-3AA0 SENTRON, measuring device, 7KM PAC3100, LCD, L-L: 480 V, L-N: 277 V, 3-phase, Modbus RTU, active/reactive energy, class 1 acc. to IEC 61557-12 & 62053- 21, wide-range power sup.
PAGE 2
Voltage curve Sinusoidal or distorted Measurable line frequency / initial value 45 Hz Measurable line frequency / Full-scale value 65 Hz Measuring procedure / for voltage measurement TRMS Reference code / acc. to DIN 40719 extended according to IEC 204-2 / acc.
PAGE 3
Product function / Display can be inverted (positive <=> negative mode) Yes Horizontal image resolution 128 Vertical screen resolution 96 Refresh time / on display ● minimum 0.33 s ● maximum 3s Communication Protocol ● is supported Modbus RTU Transfer rate ● minimum 4.8 kbit/s ● maximum 38.
PAGE 4
● at digital output / for signal <1> / minimum 10 mA ● at digital output / for signal <1> / maximum 27 mA ● at the digital outputs / at DC / limited to 100 ms / maximum 130 mA ● at the digital outputs / at DC / maximum 30 mA Output delay / at digital output ● for signal <0> to <1> / maximum 5 ms ● for signal <1> to <0> / maximum 5 ms Operating conditions for digital inputs / external voltage supply No Operating voltage / as output voltage / at DC / maximum permissible 30 V Property of the ou
PAGE 5
Consumed active power / for current measurement / per phase 500 mW Continuous current / at AC / maximum permissible 10 A Measuring category / for current measurement CATIII Zero-point suppression / for current measurement 10 mA ● for neutral conductor current 45 mA Relative measurable current / at AC ● minimum 0.2 % ● maximum 120 % Apparent power consumption / for current measurement ● with measuring range 5 A / per phase 0.
PAGE 6
● at the measurement inputs for current screw-type terminals Mechanical Design Height 96 mm Height / of the display 54 mm Width 96 mm Width ● of the display 72 mm Depth 56 mm Mounting position vertical Installation depth 51 mm Mounting type / panel mounting Yes Material thickness / of the control panel ● maximum Net weight 4 mm 469 g Environmental conditions Degree of pollution 2 Installation altitude / at height above sea level / maximum 2 000 m Standard ● for EMC for industrial sec
PAGE 7
● during storage / minimum -25 °C ● during storage / maximum 70 °C Certificates Certificate of suitability ● as EC declaration of conformity IEC 61010-1: 2001 (2nd Ed.) with Corr. 1, EN 61010-1: 2001 (2nd Ed.) and DIN EN 61010-1:2002 with "Berichtigung 1" ● as approval for Canada UL 61010-1, 2nd Ed. CAN/CSA-C22.2 NO. 61010-1-04 ● as approval for USA UL 61010-1, 2nd Ed. CAN/CSA-C22.2 NO. 61010-1-04 ● Approval Australia Yes Reference code / acc.
PAGE 8
SENTRON POWER ZUR SCHALTTAFELEI UC: UE: IE: SCHRAUBKLEMM X/5A MAX.480/277 110-250VDC MESSUNG AC MONITO PAC31 E -P -X2 V1 V2 V3 VN L/+ N/- -X4 FE DIC DI1 DI0 DOC DO1 DO0 -X3 Com +/B -/A -X1 IL1/k IL1/l IL2/k IL2/l IL3/k IL3/l SENTRON POWER PANEL FOR UC: UE: IE: X/5A MAX.