Datasheet

ManualsBrandsSiemens ManualsPressure SensorsPressure Transmitter 0-10 bar G1/2

Pressure Measurement

Transmitters for basic requirements

SITRANS P210

for gauge pressure

2/12

Siemens FI 01 · 2012

■

Technical specifications

Application

Gauge measurement Liquids, gases and vapors

Mode of operation

Measuring principle Piezoresistive measuring cell

(stainless steel diaphragm)

Measured variable

Gauge pressure

Inputs

Measuring range

• Gauge pressure 100 … 600 mbar

(1.5 … 8.7 psi)

Output

Current signal 4 ... 20 mA

•Load (U

- 10 V) / 0.02 A

• Auxiliary power U

DC 7 ... 33 V (10 ... 30 V for Ex)

Voltage signal 0 ... 10 V DC

•Load ≥ 10 kΩ

• Auxiliary power U

12 ... 33 V DC

• Power consumption < 7 mA at 10 kΩ

Characteristic curve Linear rising

Measuring accuracy

Error in measurement at limit setting

incl. hysteresis and reproducibility

• Typical: 0.25 % of full-scale

value

• Maximum: 0.5 % of full-scale va-

lue

Step response time T

<5 ms

Long-term stability

• Lower range value and measuring

span

0.25 % of full-scale value/year

Influence of ambient temperature

• Lower range value and measuring

span

• 0.25 %/10 K of full-scale value

• 0.5 %/10K of full-scale value

for a measuring range

100 … 400 mbar

• Influence of power supply 0.005 %/V

Conditions of use

Process temperature with gasket

made of:

• FPM (Standard) -15 ... +125 °C (+5 ... +257 °F)

•Neoprene -35 ... +100 °C (-31 ... +212 °F)

• Perbunan -20 ... +100 °C (-4 ... +212 °F)

•EPDM -40 ... +145 °C (-40 ... +293 °F),

usable for drinking water

Ambient temperature -25 ... +85 °C (-13 ... +185 °F)

Storage temperature -50 ... +100 °C (-58 ... +212 °F)

Degree of protection (to EN 60529) • IP 65 with connector per

EN 175301-803-A

• IP 67 with M12 connector

• IP 67 with cable

• IP 67 with cable quick screw

connection

Electromagnetic compatibility • acc. EN 61326-1/-2/-3

• acc. NAMUR NE21, only for

ATEX versions and with a max.

measuring deviation ≤ 1 %

Mounting position upright

Design

Weight Approx. 0.090 kg (0.198 lb)

Process connections See dimension drawings

Electrical connections • Connector per

EN 175301-803-A Form A with

cable inlet M16x1.5 or ½-14 NPT

or Pg 11

• M12 connector

• 2 or 3-wire (0.5 mm

) cable

(∅ ± 5.4 mm)

• Cable quick screw connection

Wetted parts materials

• Measuring cell Stainless steel, mat.-No. 1.4435

• Process connection Stainless steel, mat. No. 1.4404

(SST 316 L)

•Gasket • FPM (Standard)

•Neoprene

• Perbunan

• EPDM

Non-wetted parts materials

• Enclosure Stainless steel, mat. No. 1.4404

(SST 316 L)

•Rack Plastic

•cables PVC

Certificates and approvals

Classification according to pressure

equipment directive

(PED 97/23/EC)

For gases of fluid group 1 and

liquids of fluid group 1;

meets requirements as per article

3, paragraph 3 (good engineering

practice)

Lloyds Register of Shipping (LR) Applied

Germanischer Lloyds Register of

Shipping (GL)

Applied

American Bureau of Shipping (ABS) Applied

Bureau Veritas (BV) Applied

Det Norske Veritas (DNV) Applied

Drinking water approval (ACS) Applied

GOST Applied

Explosion protection

Intrinsic safety "i" (only with current

output)

Ex II 1/2 G Ex ia IIC T4 Ga/Gb

Ex II 1/2 D Ex ia IIIC T125 °C

Da/Db

EC type-examination certificate SEV 10 ATEX 0146

Connection to certified intrinsically-

safe resistive circuits with maxi-

mum values:

≤ 30 V DC; I

≤ 100 mA;

≤ 0.75 W

Effective internal inductance and

capacity for versions with plugs per

EN 175301-803-A and M12

= 0 nH; C

= 0 nF

FI01_2012_en_kap02.book Seite 12 Donnerstag, 17. November 2011 4:31 16