User Manual

33
Smart Infrastructure
CE2N5324en
2019-06-27
Protection pocket G ½ B" made of stainless
steel, with threaded hole G ¼", mounting
length 100 mm, incl. gasket G ½" made of
copper
S55563-F117 WZT-S100
Protection pocket G ½ B" made of stainless
steel, with threaded hole G ¼", mounting
length 150 mm, incl. gasket G ½" made of
copper
S55563-F118 WZT-S150
Protection pocket G ½ B" made of brass,
Ø 5.2x35 mm for sensor Ø 5.2x45 mm
S55563-F103 WZT-M35
Protection pocket G ½ B" made of
brass,Ø 5.2x50 mm for sensor
Ø 5.2x45 mm
LYU:WZT-M50 WZT-M50
Mounting set for sensor
Ø 5.2x45 mm, consisting of:
- 1 sensor fitting DS M10x1 mm, brass
- 2x O-rings
- 1x grooved pin
- 1 Sensor mounting aid
LYU:WZT-FA WZT-FA
Mounting set for sensor
Ø 5.2x45 mm, consisting of:
- 1 sensor fitting M10x1 mm, plastic
- 2x O-rings
- 1 Sensor mounting aid
LYU:9956230 9956230
Mounting set G ½ B" with threaded hole
G ¼" for direct mounting of long sensors
LYU:WZT-A100 WZT-A100
Sealing disk for temperature sensor M10x1
mm, Ø 8.6/5.3, size 1 mm
LYU:9060944001 9060944001
Sealing disc ½" made of copper LYU:9060948 9060948
Service key to start calibration mode LYU:9089885 9089885
Mounting plate for top hat rail LYU:WZU-MH WZU-MH
Mounting plate for wall mounting LYU:WZU-WA WZU-WA
Self-lock seal with sealing wire LYU:9956186001 9956186001
Programming accessories
Accessories Order number Type
Optical read head with USB interface for PC LYU:WZR-OP-USB WZR-OP-USB
Readout and configuration software
UltraAssist
Available on request -
Readout and parameterization software
For further information about the UltraAssist Light read and parameterization software see
chapter "Functions".
Ordering
When ordering, please provide the quantity, description, product no. and stock no.
Designation Order number Type
Ultrasonic heat meter S55561-F114 UH50-A36-00