User Manual

12/37
Building Technologies Operating Instructions for ACS Alarm software CE1U5641en
HVAC Products 3 The first steps 15.12.2005
started. Confirm the warning in dialog Hardware Installation by selecting button
Continue Anyway.
Windows 2000:
Confirm the question Do you want to continue the installation? in dialog Digital
Signature Not Found by selecting the Yes button. Installation of USB driver
Siemens OZW USB Connection is started.
Installation of the USB driver for the central unit is completed by confirming with
button Finish.
If automatic installation is not successfully completed, you can also install the driver
manually by using the hardware assistent. During the installation of ACS, the driver
was copied to the harddisk under
C:\ACS\CommServer\ACSNet\RNDIS\Siemens_OZW.inf.
Modem connection
When using the connection via the telephone network, a Hayes-compatible modem
is required on both sides. Before a modem connection can be established, the
central unit for modem communication must be parameterized. For more
information, please refer to the relevant User Manual.
After the central unit and the PC have been connected to the modems, the modem
must be configured in Windows under Start -Settings - Control Panel - Phone and
Modem Options, if this has not yet been done. From the Phone and Modem
Options dialog, select Modems and follow the instructions for installing the modem
driver
For more information, please refer to the following chapters:
• Applications
• Supervising a connection
3.6 Supervising a connection
ACS Alarm is capable of monitoring several connections simultaneously. Choose the
"Tools" menu – Connections…. The Connections window will appear showing all
available connections:
Modem
Supervising