User Manual

13/37
Building Technologies Operating Instructions for ACS Alarm software CE1U5641en
HVAC Products 3 The first steps 15.12.2005
• For all direct connections, the type of central unit must be selected. To do this,
double-click with the left mouse button on the box in the Driver column at the
appropriate connection. A selection box with all types of available central units will
appear
• For modem and USB connections, the Auto driver will automatically appear
Now, select all connections with the left mouse button and use button Don’t
supervise or Supervise to decide whether or not the connection shall be monitored.
The current settings and the state of the connections are displayed with the help of
symbols.
Symbol Meaning
Connection is supervised.
Connection is not supervised. No driver has been
selected for the connection.
Connection that should have been supervised is no
longer available, e.g. because the interface is used by
some other program or has been removed.
Connection that is not supervised is no longer available,
e.g. because the interface is used by some other
program or has been removed.
Connection is not available because the interface is
used by a modem.
If the required connection does not appear, it must be configured. For more
information, please refer to Preparing a connection.