User Manual

23/37

Building Technologies Operating Instructions for ACS Alarm software CE1U5641en

HVAC Products 4 Applications 15.12.2005

For more information, please refer to the following chapters:

• Receiving an alarm

• Overview of all alarms

• Detail view of an alarm

• Printing alarms

4.3 System report

4.3.1 Introduction to the "System report" application

The system report is used for monitoring plant operation.

It contains general information about the plant, such as type of central unit, phone

number of plant, and plant name. A system report can also transfer pending alarms,

meter readings or operating hours to the OCI600 central unit.

An incoming system report can be output on a printer.

The system report list can be printed out.

For more information, please refer to the following chapter:

• Processes in the "System report" application

4.3.2 Processes in the "System report" application

This chapter describes the following processes:

• Receiving a system report

• Overview of all system reports

• Detail view of a system report

• Printing system reports

• Exporting system reports

4.3.3 Receiving a system report

When received, a system report is entered on the system report list. If pending

alarms are also transferred, reception of the alarms will be indicated according to the

selection made in the "Alarm" application: As an acoustic signal, output on a printer,

or popup window.

Detailed information about the system report can be displayed with the help of Detail