User Manual

5/37
Building Technologies Operating Instructions for ACS Alarm software CE1U5641en
HVAC Products 1 Introduction 15.12.2005
1 Introduction
1.1 Overview
ACS7... is a PC software package for remote operation, monitoring and
commissioning of heating, ventilation and district heating plant, and for remote readout
of consumption data.
Use:
• Remote management with central communication units OZW775 and
OZW771:
• Remote operation and monitoring of Synco plant whose devices (primary
controllers, individual room controllers, room units) are connected via KNX
(Konnex bus)
• Remote management with central communication units OCI600 and OCI611:
• Remote operation and monitoring of heating plant whose devices
(controllers, pulse adapters, temperature sensors / adapters, digital input
modules and relay modules) are connected via LPB (Local Process Bus)
• Remote management with M-bus central units OZW10 and OZW111:
• Remote operation and monitoring of M-bus-compatible devices (controllers
and meters) in district heat substations
• Acquisition of consumption data of M-bus-compatible meters for consumption
cost billing
• Acquisition of consumption data from wireless consumption meters of
Siemeca
™ AMR system transmitted to the M-bus central unit OZW10 via the
M-bus interface of the WT*16 network node
• Diagnostics and commissioning of LPB controllers with service interfaces
OCI69 and OCI700
• Diagnostics and commissioning of KNX controllers with service interface
OCI700
• Reception of alarms from plant using OZW30 and OCI55
Among other items, the ACS7… software package contains the following program a
description of which is given in the present Operating Instructions:
• ACS Alarm: Alarm software
Programs also included in the ACS7… software package:
• ACS Operating: Operating software
• ACS Service: Service software
• ACS Batchjob: Batchjob software
The Alarm software contains the following applications:
• Alarm: Alarms from the central unit or plant are received, stored, displayed and
output on a printer
• System report: Information from the central unit or plant is received, stored,
displayed and output on a printer
If this is the first time you work with the ACS Alarm software, we recommend you to
proceed with chapter The first steps.
Use
Functions