User Manual

17/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 2 Processes Dec. 1, 2005
After the central unit and the PC have been connected to the modems, the modem
must be configured in Windows under Start - Settings - Control Panel – Phone and
Modem Options, if this has not yet been done.
From the Phone and Modem Options dialog, select Modems and follow the
instructions for installing the modem driver.
Then, create the plant.
For more information, refer to the following chapters:
• The first steps
• Working with connections
• Working with a plant
• Navigating through a plant
• Working with the devices
• Applications
2.3.3 Uploading and changing the data of the devices
After the creating a plant and refreshing the device list, you can upload, change and
log the data of these devices.
For that purpose, from the "Applications" menu, choose Plant diagram..., Popcard...,
Online trend..., Offline trend..., File transfer..., Parameter settings... or
Commissioning report....
After work with the plant has been concluded, the connection to the plant can be
aborted again.
For more information about the various applications, refer to the following chapters:
• Plant diagram:
Visualization and remote operation of data points with graphic display of plant.
• Popcard:
Visualization and remote operation of all transmitted data points of the
connected devices.
• Online trend:
Acquisition and presentation of the dynamic behavior of selected data points with
connection to the plant.
• Offline trend:
Acquisition and presentation of the dynamic behavior of selected data points with
no connection to the plant.
• File transfer:
Transmission and storage of the files of the central units and memory cards.
• Parameter settings:
Uploading and editing the setting parameters of a device in tabular form.
• Commissioning report:
Logging the setting values of individual devices, device groups or the entire
plant.
For more information, refer to the following chapters:
• The first steps
• Working with connections
Uploading and changing