User Manual

21/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 2 Processes Dec. 1, 2005
After the central unit and the PC have been connected to the modems, the modem
must be configured in Windows under Start - Settings - Control Panel - Phone and
Modem Options, if this has not yet been done.
From the Phone and Modem Options dialog, select Modems and follow the
instructions for installing the modem driver.
Then, the plant can be created.
For more information, refer to the following chapters:
• The first steps
• Working with connections
• Working with a plant
• Navigating through a plant
• Working with the devices
• Applications
2.4.3 Establishing a connection
Before a connection to a plant can be established, a plant file must have been created
on the PC. That file must contain all data relating to the connection: For detailed
information, refer to chapter Creating a plant.
To establish a connection to a plant, select the "Plant" menu – Connection on. The
connection will be established. If the connection cannot be opened, check the settings
according to chapters Preparing a connection and Creating a plant.
You can also establish a connection to the plant by using the following button:
For more information, refer to the following chapters:
• The first steps
• Working with connections
• Working with a plant
• Navigating through a plant
• Working with the devices
• Applications
2.4.4 Aborting a connection
From the "Plant" menu, select Connection off to abort a connection to a plant.
You can also abort a connection to the plant by using the following button:
For more information, refer to the following chapters:
• The first steps
• Working with connections
• Working with a plant
• Navigating through a plant
• Working with the devices
• Applications
Plant file
A
borting a connection