User Manual

28/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 2 Processes Dec. 1, 2005
devices on the same line as the central communication unit do not exceed the
maximum permissible number of devices of the central unit (150).
Deleting devices:
• To delete devices, click with the left mouse button in the right half of the window
on all devices to be deleted and use the right mouse button to select Delete
devices. After that, the devices on the central unit will be deleted first, then
those on the PC
Updating the device data:
• If you have changed device data (e.g. the plant diagram) locally (e.g. via the
OCI700), you need to update the data on the PC. For the entire plant, click in
the left tree view on the central unit with the right mouse button and select
Refresh reference data points. For individual devices, use the right mouse
button to select in the right half of the window the device and then Refresh
reference data points. The device data will then automatically be transferred
to the PC.
OCI700 - KNX:
In the case of Synco plants connected via the OCI700 service interface, the device list
can be edited in a number of ways. For that, first establish a connection to the plant
and refresh the device list. Then, select the "Plant" menu – Edit device list.... Dialog
Edit device list appears with all devices presently on the device list.
The devices on the device list appear in several columns. The individual columns
have the following meaning:
Column Description
Device name
The device name can be assigned together with the
network address.
Display if no device name has been entered: Device n
Network address KNX bus address: Area.Line.Device address
ID
Unambiguous KNX serial number from production
Type
Device type, e.g. RMU710
Status OK: restricted communication
Address not defined: Factory setting, restricted
communication only
Adress conflict: Some other device communicates
with the same network address
Not found: Device has been removed
Devices with status Address not defined, Adress conflict or Not found are
highlighted in red.
Note: Only Synco devices, RXB and KNX line couplers will be included on the device
list, depending on the selected search area. The functions described here are not
possible with other KNX devices.
Manual addressing:
Each of the devices on the device list can be assigned an address and a device
name:
1. Click with the left mouse button on the required device. The device will be
highlighted in blue.
2. Select Address assignment - button Manually.... Dialog Address assignment
appears.
Note: Button Manually... is available only if exactly one Synco device has been
highlighted in blue. No address can be manually assigned to KNX line
couplers.
OCI700-KNX
Manual addressing