User Manual

30/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 2 Processes Dec. 1, 2005
2. Add the devices: Enter the devices you want to manually add to the device list
of the OZW10 M-bus central unit or the WTT16 network node on a temporary
list.
3. Download the device list: Transfer the devices entered on the list to the device
list of the OZW10 M-bus central unit or the WTT16 network node.
4. If you have logged on at the WTT16 network node, you can now log out again.
Deleting devices:
To delete devices of the OZW10 M-bus central unit or the WTT16 network node,
proceed as follows:
1. If you want to delete devices in the WTT16 network node, you need to log on
at the network node. The only devices you can delete in the network node are
those connected to the M-bus.
2. Delete the devices that do not exist any more.
3. If you have logged on at the WTT16 network node, you can now log out again.
Logging on at the WTT16 network node:
In the Edit device list window, use the left mouse button to click in the left half of
the window on the WTT16 network node where you want to add devices. Use the
right mouse button to click in the left half of the window and select Radio network -
Log in. Window Log in radio network appears. To be able to add devices, you
need to log in as the administrator. For more information about user administration
of the WTT16 network node, refer to the documentation covering the Siemeca™
AMR system. After having made the entry, confirm by clicking the OK button.
Adding devices:
In the Edit device list window, use the left mouse button to click in the left half of
the window on the device where you want to add devices. The devices available for
selection are the OZW10 M-bus central unit and the WTT16 network node.
Use the right mouse button to click in the right half of the window and select New –
Devices... . Window Insert devices appears. Click the Add device button. Now,
you can make entries in the fields M-bus address, Device type, Customer
number, Manufacturer code, Medium, SW version and Baud rate. If the M-bus
address or the type of device has been correctly preselected, it is only the required
entry field that appear. The Add button allows you to transfer the devices to a
temporary list which you can then download to the OZW10 M-bus central unit or the
WTT16 network node. If you do not want to add additional devices, click the Cancel
button.
Writing the device list:
You can download the list with the devices you want to add to the OZW10 M-bus
central unit or the WTT16 network node by clicking the Write device list button. It is
only now that the devices are entered on the device list. The OZW10 checks
whether the addesses of the manually entered devices are correct. If there are
address conflicts, the devices will not be accepted. All devices transferred to the
OZW10 M-bus central unit or the WTT16 network node will be removed from the
temporary list.
Deleting devices:
In the Edit device list window, use the left mouse button in the left half of the
window to select the device you want to delete. Use the right mouse button to click
in the left half of the window and select Delete device. The device will be deleted.
After having selected a WTT16 network node, all devices connected to the network
node will be deleted. The network nodes not connected to the M-bus cannot be
Deleting devices
Logging on
A
dding devices
Writing the device list
Deleting devices