User Manual
31/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 2 Processes Dec. 1, 2005
deleted. Remove these network nodes using the documentation covering the
Siemeca™ AMR system and upload the Device list.
Logging out from the WTT16 network node:
When you have logged in at the WTT16 network node, you can log out again to
prevent unauthorized access. In the Edit device list window, use the left mouse
button to click in the left half of the window on the WTT16 network node from which
you want to log out. Then, click with the right mouse button in the right half of the
window and select Log out.
For more information, refer to the following chapters:
• The first steps
• Working with connections
• Working with a plant
• Navigating through a plant
• Working with the devices
• Applications
2.5.8 Editing a plant view
This function is not contained in all ACS7.. software packages. For more information,
refer to capter Licensing.
After the data of the devices contained in the plant have been transferred to the PC
and the devices have been identified, you can navigate trough the plant in the various
applications using the device view ("View" menu – Device view).
If you wish to make use of more convenient navigation through the plant, you can
create your own navigation tree which will enable you to access devices and data
points faster and more straightforwardly. Select the "Plant" menu – Edit plant....
Then, the Edit plant window is opened:
• In the left half of the window, you find the Plant view created by you: It consists of
nodes (branches) where you have added nodes or devices of the plant
• In the right half of the window, you find all devices that were found when updating
the device list and that have not yet been entered in the plant view: List of non
assigned devices.
To change the Plant view, proceed as follows:
1. To add nodes (branches), use the left mouse button to click on the node where you
want to insert a subnode. A menu appears, where you select Insert node....
2. To assign a device to a node, press the left mouse button to click on the respective
device on the List of non assigned devices. Hold the left mouse button down
and drag the device to the node in the Plant view where you want to add the
device. The device will be assigned to the node by releasing the left mouse button.
You can sort the devices on the List of non assigned devices by clicking on one
of the column heads.
3. To move a device to some other node, use the left mouse button to click on the
respective device in Plant view. Hold the left mouse button down and drag the
device to the node in Plant view to which you want to assign the device. The
device is assigned to the node by releasing the left mouse button.
4. To delete a device or node, select the element you want to delete. Use the right
mouse button and select Delete or press the DEL key. If the selected object is not
a device, it will be removed.
For this command, you can also use the following button:
5. To assign some other name to a node or device, select the element you want to
rename. Use the right mouse button and choose Properties.... In the dialog that
Logging out
Editing a plant view