User Manual

32/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 2 Processes Dec. 1, 2005
appears, the name of the node or the description of the device can be changed.
For this command, you can also use the following button:
After the plant view has been created, it can be used for navigating through the
applications: "View" menu – Plant view.
For more information, refer to the following chapters:
The first steps
Working with connections
Working with a plant
Navigating through a plant
Working with the devices
Applications
2.6 Navigating through a plant
2.6.1 Navigating through a plant
Select devices or data points from the various applications. To find the devices of a
plant, you have 2 choices:
You work with the plant view, if you would like to use navigation matched to your
individual needs
You work with the device view, if you would like to use bus addressing as a guide,
or if the creation of a plant view is not worth the effort
You can print the device view and the plant view.
For navigating through a plant, you can also use the following buttons:
Back: The node selected last appears
Forward: Reversal of action Back
One level higher: The node at the next higher level will be
selected
For more information, refer to the following chapters:
The first steps
Working with connections
Working with a plant
Working with the devices
Applications
2.6.2 Navigating with a plant view
This function is not contained in all ACS7.. software packages. For more information,
refer to chapter Licensing.
The plant view is a self-created navigation tool designed to find devices and data
points in a plant. For information about the creation of a plant view, refer to chapter
Editing a plant view.
To navigate with the plant view, select the "View" menu – Plant view:
The plant view has a tree structure: Nodes (branches) of the tree can be opened or
closed by clicking + / - . Devices are displayed with special self-explanatory symbols.
Plant view
Device view
Plant view