User Manual

34/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 2 Processes Dec. 1, 2005
Printing the current page. When you position the
onscreen pointer on the button and you press the
right mouse button, another window is opened. In
that window, you can choose the required printer.
Printing all pages. When you position the onscreen
pointer on the button and you press the right mouse
button, another window is opened. In that window,
you can select the required printer.
Sending the pages as a "List & Label" file (.LL) to a
recipient.
Saving the pages as a "List & Label" file (.LL) in a
certain directory. Using the "Plant" menu – Print
from file..., the file can be reopened and printed in
the preview window at any time.
Closing the preview. The window for the preview of
the report will be closed.
For more information, refer to the following chapters:
• Navigating with a plant view
• Navigating with a device view
• The first steps
• Working with connections
• Working with a plant
• Working with the devices
• Applications
2.7 Working with the devices
2.7.1 Working with the devices
For every plant, a plant file must be created:
• Working with a plant
After the plant has been created and the connection to the plant has been
established, the information about the devices contained in the plant must be
transferred to the PC:
• Update a device list
Now, the devices contained in the plant are stored in the plant file. The program
knows all devices installed in the plant. There is automatic identification as to which
device types are installed and which plant diagram has been selected on the device.
The program supplied also contains a device description of each device. Based on the
information given in the device description, the program automatically knows:
• The data points contained in a device
• Whether a data point can be read or written
• The possible setting values for a data point and the data point’s default value when
the device was supplied
• How operating pages must be presented in the "Popards" application
• The diagram and data point that shall be presented in the "Plant diagram"
application
• Which data points of the "Parameter set" application are connected with the Wizard
• The data points for editing that can be selected in the various applications
Update a device list
Device description