User Manual

36/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
3 Applications
3.1 Applications
The ACS... provides the following applications:
• Plant diagram:
Visualization and remote operation of data points with a graphic display of the
plant.
• Popcard:
Visualization and remote operation of all transmitted data points of the
connected devices.
• Online trend:
Acquisition and presentation of the dynamic behavior of selected data points with
connection to the plant.
• Offline trend:
Acquisition and presentation of the dynamic behavior of selected data points with
no connection to the plant.
• File transfer:
Transmission and storage of the files of the central unit and of the memory
cards.
• Parameter settings:
Uploading and editing the setting parameters of a device in tabular form.
• Commissioning report:
Logging the setting values of individual devices, device groups or the entire
plant.
From the "Tools" menu – Options..., section Startup application, select which of the
above applications shall be opened right after starting the ACS...
For more information, refer to the following chapters:
• The first steps
• Working with connections
• Working with a plant
• Navigating through a plant
• Working with the devices
3.2 Plant diagram
3.2.1 Introduction to the "Plant diagram" application
This application is not contained in all ACS7.. software packages. For more
information, refer to chapter Licensing.
This application permits the graphic display of plant (individual devices or groups of
devices) with the following properties:
• Data point values are automatically updated in the diagram
• Setpoints can be changed in the diagram
• With user-defined diagrams, links to other diagrams can be established
A
pplications