User Manual

38/101

Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en

HVAC Products 3 Applications Dec. 1, 2005

• Displaying data points in a plant diagram

• Changing the value of a data point in a plant diagram

• Printing a plant diagram

• Creating a new plant diagram

• Working with a plant

3.2.4 Displaying data points in a plant diagram

After opening a plant diagram, the values of the data points appear in parentheses. If

the data point has been read or written, it appears without parentheses:

(OCI600) Value in parentheses: The data point has been written

OCI600 Value without parentheses: The data point has been read

– – – 3 dashes: Data point has not yet been read or it can neither

be read nor written because there is no communication with

the device or the value is not available

For more information, refer to the following chapters:

• Changing the value of a data point in a plant diagram

• Printing a plant diagram

• Selecting a plant diagram

• Adding a data point to the plant diagram

3.2.5 Changing the value of a data point in a plant diagram

You can change the value of a data point in a plant diagram. Note that not all data

points can be changed.

Select a data point. Press the right mouse button. The menu is opened. Select

Properties... Window Data point – data point properties appears. In that window,

you can change the relevant settings.

For this command, you can also double-click on the value or click the following button:

After changing the value, the value in the diagram appears in parentheses. The

parentheses are maintained until the value has actually been written to the device.

For more information, refer to the following chapters:

• Displaying data points in a plant diagram

• Printing a plant diagram

• Selecting a plant diagram

• Adding a data point to the plant diagram

3.2.6 Printing a plant diagram

Use the right mouse button to click on the plant diagram you want to print:

A. Select Print.... The Print dialog will be opened. Select the Printer you would like

to use and the Pages you would like to print. Select Start to start printing or click

the following button:

B. Select Print preview.... The Print dialog is opened. Select the Printer you want to