User Manual

40/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
asks for additional information or indicates when data points cannot be assigned
to any of the devices. Data points that cannot be assigned do not appear in the
plant diagram.
C. To adopt a plant diagram from some other plant or some other PC, select in the
left window the directory into which you want to import the plant diagram. Click on
it with the right mouse button and select Import from.... The Open export file
dialog appears. Select the required export file based on the name of the original
plant diagram or the file name of the export file.
The program attempts to assign the data points of the copied plant diagram for
devices contained in the target directory. Depending on the situation, the program
asks for additional information or indicates when data points cannot be assigned
to any of the devices. Data points that cannot be assigned do not appear in the
plant diagram.
To export a plant diagram, select from the left window the plant diagram to be
exported. All user-defined plant diagrams (blue) can be exported. Use the right
mouse button to click on the selected plant diagram and select Export to.... The
Save As dialog appears. Select the place where you want to export the plant
diagram.
The new plant diagram is now placed in the selected directory. In the left window,
select the newly created plant diagram to check whether the required diagram is
shown.
The new plant diagram can now be further edited.
To delete a plant diagram, select in the left window the plant diagram you want to
delete. Using the right mouse button, click on the selected plant diagram and select
Delete.
For more information, refer to the following chapters:
• Editing a plant diagram
• Changing the properties of a plant diagram
• Selecting a plant diagram
3.2.8 Editing a plant diagram
User-defined plant diagrams (blue) can be changed at any time:
This is accomplished by changing the properties of the plant diagram or by directly
editing the plant diagram.
To directly edit a plant diagram, select the user-defined diagram and position the
cursor in the right window. Now, press the right mouse button. A menu is opened. In
that window, select Edit mode. The plant diagram is now in edit mode. In edit mode,
you can insert new data points, text or links to other plant diagrams.
Standard plant diagrams (red) cannot be changed.
The following functions are available for editing user-defined plant diagrams:
• Adding a data point to a plant diagram
• Adding text to a plant diagram
• Adding a link to a plant diagram
• Using grid lines
• Editing a plant diagram
After editing a plant diagram, the edit mode must be deactivated again. To do this,
position the cursor in the right window and press the right mouse button. A menu is
opened. In that window, select Edit mode.
Import
Delete
Edit mode