User Manual

41/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
For more information, refer to the following chapters:
• Creating a new plant diagram
• Changing the properties of a plant diagram
3.2.9 Adding a data point to a plant diagram
Data points can be added to all user-defined plant diagrams (blue).
Select the user-defined plant diagram where you wish to add a data point and change
to edit mode.
Position the onscreen pointer on the plant diagram. Press the right mouse button and
select New – Data point.... Then, dialog Plant diagram – data point properties is
opened. The dialog is subdivided into 2 parts. The first part, Data point, contains the
specification of the data point and the second part, Data point text, the specification
of the data point text.
In the Data point part, select the data point you want to display and define Font set,
Color, Margin, Alignment, Background color, or whether Size automatic shall be
adapted, fix Width or Height, and decide whether you want Show data point text.
In the Data point text part, the default text on the data point automatically appears.
You can change this Text, the Font set, the Color, the Alignment where the text of
the data point value shall appear, and the Blank [Pixel] between the text and the data
point value. You also select whether Size automatic shall be adapted or a fixed
Width or Height shall be used.
After entry, close the dialog by clicking the OK button. The data point now appears in
the plant diagram.
• To move the data point to some other location, use the left mouse button and click
on the data point value. Hold the left mouse button down and drag the data point.
The data point will be positioned at the location where the left mouse button is
released again
• To subsequently change the display format of the data point, use the right mouse
button to click on the data point value and select Properties.... Dialog Plant
diagram – data point properties is opened
• To remove the data point from the plant diagram, press the right mouse button and
select Delete
To copy the format, choose the data point, text or link whose format you want to
adopt. Press the right mouse button and select Copy. Now point with the onscreen
pointer to the data point where you want to transfer the format. Press the right mouse
button again and select Paste format.
For more information, refer to the following chapter:
• Editing a plant diagram
3.2.10 Adding text to the plant diagram
Text can be added to all user-defined plant diagrams (blue).
Select the user-defined plant diagram where you wish to add text and change to edit
mode.
Position the onscreen pointer on the plant diagram. Press the right mouse button and
select New – Text.... Then, dialog Plant diagram – text field properties is opened.
Enter the required text and define Font set, Color, Margin, Alignment, Background
color, whether Size automatic shall be adapted, fix Width or Height, decide whether
you want Word wrap.
New data point
Data point text
Move data point
Data point format
Delete data point
Copy format
New text