User Manual

42/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
After entry, close the dialog by clicking the OK button. The text now appears in the
plant diagram.
• To move the text to some other location, use the left mouse button to click on the
text. The text will be positioned at the location where the left mouse button is
released again
• To subsequently change the display format of the text, use the right mouse button to
click on the text and select Properties.... Dialog Plant diagram – text field
properties is opened
• To remove the text from the plant diagram, press the right mouse button and select
Delete
To copy the format, choose the data point, text or link whose format you want to
adopt. Press the right mouse button and select Copy. Now point with the onscreen
pointer to the data point where you want to transfer the format. Press the right mouse
button again and select Paste format.
For more information, refer to the following chapter:
• Editing a plant diagram
3.2.11 Adding a link to a plant diagram
Links to other plant diagrams can be added to all user-defined plant diagrams (blue).
When clicking on a link, the associated plant diagram will automatically be opened.
Select the user-defined plant diagram where you wish to add the link and change to
edit mode.
Position the onscreen pointer on the plant diagram. Press the right mouse button and
select New – Link.... Then, dialog Plant diagram – link field properties is opened.
Enter the required text for the link, select the Address of the plant diagram to which
the change shall be made and define Color, Margin, Alignment, Background color,
whether Size automatic shall be adapted, fix Width or Height and decide whether
you automatically want Word wrap.
After entry, close the dialog by clicking the OK button. The text now appears in the
plant diagram.
• To move the link to some other location, use the left mouse button to click on the
link. Hold the left mouse button down and drag the link. The link will be positioned at
the location where the left mouse button is released again
• To subsequently change the link, use the right mouse button to click on the link and
select Properties.... Dialog Plant diagram – link field properties is opened
• To remove the link from the plant diagram, press the right mouse button and select
Delete
To copy the format, select the data point, text or link whose format you want to adopt.
Press the right mouse button and select Copy. Now point with the onscreen pointer to
the data point where you want to transfer the format. Press the right mouse button
again and select Paste format.
If the plant view is subsequently changed, certain links may not work anymore since
the address of the link is no longer the same, due to the changed plant view. In that
case, assign the new address to the relevant link.
For more information, refer to the following chapter:
• Editing a plant diagram
Move text
Text format
Delete text
Copy format
New link
Move link
Link format
Delete link
Copy link