User Manual

45/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
• External editing of Popcard
• Creating a new Popcard
• Editing Popcard
3.3.3 Selecting a device from Popcard
If you want to view device data in Popcard format, or if you want to change values,
you need to select Popcard first.
Procedure:
Select the "Applications" menu – Popcard.... The Popcard window is opened. On the
left side of the window, you find the directory on navigating through the plant in which
you find the required Popcard. Using the "View" menu – Device view / Plant view,
you can change between Device view and Plant view. Open the tree by clicking on + .
Additional nodes or a standard Popcard (red) appears and, if present, the personally
created Popcard (blue). Standard Popcards only exist for devices. Open one of the
Popcards by clicking on +. The individual pages and sections of the Popcard appear.
These pages contain the data points. When making the selection, these data points
appear in the right half of the window.
For more information, refer to the following chapters:
• Displaying data points in Popcard
• Displaying reference data points in Popcard
• Changing the value of a data point in Popcard
• Checking the status of a data point in Popcard
• Printing in Popcard
• External editing of Popcard
• Creating a new Popcard
• Working with the plant
3.3.4 Displaying data points in Popcard
After opening a Popcard, page or section, the data points appear on the right side of
the window.
The data points displayed depend on the standard Popcard pertaining to the relevant
device, or on the definition of the self-created Popcard. The same data point can
occur on several Popcards, pages or in several sections. The same data point is
shown in several columns. The columns have the following meaning:
Column Description
No.
Consecutive numbering of the data points on a page
Line no.
Referring to the installation instructions of the relevant device
Address
Address of the device to which the data point belongs
Value
Value of the data point
Unit
Unit of the data point
Sorting can take place by column.
After opening a Popcard, page or section, the values of the data points appear in red.
If the data point has been read or written, it appears in black:
Red: The data point not yet read
Black: The data point has been read
Selecting a device
Displaying data points