User Manual

52/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
For more information, refer to the following chapters:
• Adding a new page / group to Popcard
• Editing a Popcard
3.3.14 Adding a new data point to Popcard, a page or section
Data points can be added to all user-defined Popcards (blue) or their pages or
sections.
A. Select the Popcard / page / section where you want to add data points. Position
the onscreen pointer in the right window. Press the right mouse button and select
New – Data point.... Dialog Data point selection is opened. Navigate through the
plant in the left half of the dialog to find the required data points. In the right half of
the dialog, select the data points you want to add (multiple selection possible).
Click the Add button each time you want to add a data point and all selected data
points will be added to the Popcard / page / section.
After all required data points have been added, close the dialog by clicking the
Close button.
B. To copy and paste data points, select in the right window the data points you want
to copy (multiple selection possible). Press the left mouse button, hold it down and
drag the data points to the Popcard / page / section where you want to add the
data points. Then, release the left mouse button.
The program attempts to assign the data points for the devices contained in the
target directory. The program may ask for additional information or notifies if data
points cannot be assigned to any of the devices. Data points that cannot be
assigned will not be displayed.
The following functions are available for editing Popcards, pages and sections:
• Adding a new separator to Popcard, a page or section
• Sorting data points, sections and pages
To delete a data point, select the relevant data points (multiple selection possible).
Use the right mouse button to click on the data point and select Delete.
For more information, refer to the following chapters:
• Adding a new section to Popcard pages
• Adding a new page / group to Popcard
• Editing a Popcard
3.3.15 Adding a new separator to Popcard, a page or section
Separators can be added to all user-defined Popcards (blue), their pages or sections.
They are used for visually separating data points to make the structure easier to
understand.
A. Select the Popcard / page / section where you want to add a separator. Position
the onscreen pointer in the right window. Press the right mouse button and select
New – Separator.... Then, the Separator properties… dialog is opened. Enter
the name of the separator.
After entry, close the dialog by clicking the OK button. The separator is now added
to the Popcard / page / section.
B. To copy and paste a separator, select in the right window the separator you want
to copy. Press the left mouse button, hold it down and drag the separator to the
Popcard / page / section where you want to add the separator. Then, release the
left mouse button.
New data point
Copy
Delete
New separator
Copy