User Manual

68/101
Building Technologies Operating Instructions for ACS Operating and ACS Service CE1U5640en
HVAC Products 3 Applications Dec. 1, 2005
3.6 File transfer
3.6.1 Introduction to the "File transfer" application
This application is not contained in all ACS7... software packages. For more
information, refer to chapter Licensing.
This application provides for the exchange of files between the central unit and a PC.
It enables
• files to be copied from the central unit or its memory card to the PC
• files to be copied from the PC to the memory card inserted in the central unit
• the memory card to be formated
For visualizing the data, a selectable Editor can be started that is suited for use in
connection with ASCII files.
Automatic file transfer can be accomplished with the help of the Batchjob software.
Files can only be uploaded or downloaded by central units type OZW775, OCI600
and OZW10. The other types of central units do not support this function.
For more information, refer to the following chapter:
• Processes in the "File transfer" application
3.6.2 Processes in the "File transfer" application
The following processes are described in this chapter:
• Files directly from the central unit
• Files on the memory card
• Formating memory cards
• Copying and opening files
• Copying files
• Deleting files
3.6.3 Files directly from the central unit
The central units provide certain information in a file. These files are not stored on the
memory card but directly in the central unit.
OZW775:
After starting the File transfer application, the left half of the window shows you the
following directory:
• History data
Make certain you have established a connection to the plant. Use the left mouse
button to select the History data directory. The right half of the window shows all files
that exist in the central unit:
• The directory is automatically uploaded when starting the application, provided there
is a connection to the plant at this point in time
• The directory is automatically uploaded if the plant has already been started and a
connection to the plant is then established
• You can again upload the directory at any time by selecting History data with the
right mouse button and then Upload directory